cold press
英 [kəʊld pres]
美 [koʊld pres]
冷压机；冷压；常温压制
双语例句
- Mila has found lovely cold press oils that she purchased from the web for this recipe.
Mila已经从网上找到了为这一配方所购买的可爱冷轧油。 - The oil that comes from the first "pressing" of the olive, is extracted without using heat ( a cold press) or chemicals, and has no "off" flavors is awarded "extra virgin" status.
这种橄榄油源于橄榄果的第一次压榨，没有采用加热或化学的提取方法，特级初榨油的香味依然保留着。 - The result shows that the cold forging press would not be jammed.
分析发现，该广义肘杆机构冷锻压力机不会出现闷车情况。 - The problems which are affected by cold press rolling and hot press rolling and the resolving method, which is a.
文章对这些研究成果进行介绍，主要内容为滚压成形方法、冷和热挤滚压成形时出现的问题及解决措施。 - The technique of electrode molding is cold press.
电极成型采用冷压的方式。 - Cold Press Technique of Laminated Veneer Lumber for Fast-Growing Populus ussuriensis
速生杨木单板层积材冷压工艺研究 - Study on object data model in CAD of cold press die
冷冲模CAD对象数据模型的研究 - The Object-Oriented Structurized and Visualized Replanting of The CAD/ CAM System of Cold Press Dies
冲裁模CAD/CAM系统面向对象结构化、可视化移植 - Process and equipment needed including aluminium ( alumnus alloy) continuous casting and rolling, aluminium continuous extrusion, continuous wire drawing, cold press weld and wire stranding;
对工艺技术与装备：铝（铝合金）连铸连轧、铝连续挤压、连续拉线、冷压焊和绞线； - The finite element calculation for lower table of 400-TON artificial plate cold press machine finite. Finite sets
四百吨人造板冷压机下工作台的有限元法计算 - By use of cold press method, in which the surface of basic board is covered by bamboo flake and the back is covered by common turning wooden veneer, bamboo composite board is developed.
以冷压法研制基材表面覆盖竹片，背面配置普通旋切木质单板的竹材复合板。 - This paper deals with one-step or two-step pressing method for making laminated poplar veneer lumber, 12 plies are pressed once in hot or cold press when one-step pressing method is used.
本文研究了两种制造单板层积木（LVL）的方法：一步压制法，将12张单板一次热压或冷压成厚板； - This paper focus on principles of rolling plasticity forming and factors which are affected by cold press rolling and hot press rolling and anticipates to recognize the inherent law of rolling plasticity forming.
主要对滚压成形原理、冷挤及热挤成形时的影响因素进行了分析与研究，期望能对认识滚压成形技术的内在规律有所帮助。 - In this paper, Ce-ZrO_2 and ( Ce, Y)-ZrO_2 are mixed with different CePO_4 content by mechanical milling method, followed by dry pressing and CIP ( cold isostatic press). The green body is sintered under different temperature.
本文利用机械方法将Ce-ZrO2和（Ce，Y）-ZrO2分别与不同含量的CePO4混合，采用干压成型和等静压成型，然后在不同温度下无压烧结。 - Fourty-two health young men are reported who underwent cold press test.
本文报导42例健康青年人，冷加压试验。 - Idea and application area of cold press of oilseed
油料冷榨的概念和应用范围 - The development reason and actuality of cold press of oilseed in fremdness were introduced, the advantage and disadvantage of cold press of oilseed and the technical index of this technology were also introduced, the suitable application area of cold press in China was discussed.
介绍了国外油料冷榨技术的发展缘由和现状，以及油料冷榨技术所具有的优缺点和应达到的技术指标，并对适合于中国油料冷榨技术的应用范围进行了叙述。 - Study on Feat Effect in Aluminum Foil Cold Rolling Press
铝箔冷轧制的热效应研究 - Study on Cold Press Forming Progress of the Thick Wall Long Tube Parts
厚壁长筒形零件冷挤压成形工艺的研究 - The processing of the long bamboo-wood composite materials, using method of the cold-hot-cold press
用间歇冷热冷法压制竹木复合结构长材 - The Preparation and Sensory Evaluation by Fuzzy Mathematics of Microencapsulated Cold Press Orange Peel Oil
微胶囊化桔油的制备及其风味评定 - Program Design of Assembly Drawing for Cold Press Die in HPC System
冲裁模HPC系统的装配图程序设计 - The copper matrix composites reinforced with short carbon fibers ( CFs) were prepared by cold press and sintering using copperized short CFs. The friction and wear properties of the composites were tested.
采用冷压烧结工艺制备了短碳纤维增强铜基复合材料，考察了该复合材料的干摩擦磨损性能。 - Experimental study of the law relating the extruding load of cold extrusion press to buffering parameters
冷挤压机载荷与缓冲参数关系的试验研究 - Exploitation and Application of Cold Press Almond Oil and Protein Power
冷榨杏仁油及杏仁蛋白粉的开发与利用 - The influences of various binders on the cold press forming strength of Si-Mn powder were investigated and it was found that different kinds of binders and different additions rate used would give different results.
研究了几种粘结剂对Si&Mn合金粉冷压成型强度的影响。发现不同的粘结剂，不同的用量有不同的结果。 - Study on Cold Press Forming Strength of Si-Mn Alloy Powder
Si&Mn合金粉冷压成型强度的研究 - Research on Foamed Porous Al-Alloy with Cold Press Sintering-Dissolving Process
冷压烧结溶解法制备多孔泡沫铝合金的研究 - A design scheme of apply for small cold screw press of hard core oil was presented. ( 2) The key theory and technology of screw cold press design was studied.
提出了一种应用于硬果核油料压榨的小型螺旋冷榨机的研制方案。（2）研究了螺旋冷榨机设计的关键理论与技术。 - So that the computer technology could provide an academic reference combined with mold design techniques for pressing products analysis and design. First, the paper elaborated on the principle of cold press mold design and the role and function of AutoForm software, UG software.
使计算机技术和模具设计技术相互结合与渗透，为冲压产品模具的分析和设计提供一个合理的理论依据。论文首先详细阐述了冷冲拉延模具设计原则、AutoForm软件、UG软件的作用和功能。